Biomedical > Accessories > Interface Modules

Interface Modules

Input Interface Module   

The auxiliary input interface system is for data logging of up to four analog signals generated by external devices (pulse oximeter, blood pressure monitor, breathing rate monitor, inspired gas mixture monitor, etc). The data is sent to OxiplexTS or Imagent and is displayed along with oximetry measurements. This allows for the correlation of tissue oximetry data with a wide array of other measurements.

Output Interface Module   

The output system is for exporting OxiplexTS data to an external device. The signal can be output at 10 Hz or less, the OxiplexTS can make measurements up to 50 Hz. Four outputs, saturation and total hemoglobin concentration for both channels is provided.

Fibers and Bundles   

ISS has available many emitter fibers and detector bundles for developing your own sensor.

The standard individual emitter fiber comes with a SMA connector on one end and bare cleaved fiber on the other end. The fiber type is 400Ám-diameter core, plastic clad silica with a standard length of 2.5 meters. Other fiber lengths are available upon request.

Other options available include:
1. Individual emitter fiber with SMA connector on one end and a metal ferrule containing filter attenuator on the other end. Specify desired filter attenuation and wavelength when ordering. The fiber type is 400Ám-diameter core, plastic clad silica. Standard length is 2.5 meters. Other fiber lengths are available upon request.

2. Two individual emitter fibers with two SMA connectors paired together to end in one metal ferrule containing filter attenuator. Specify desired filter attenuation and wavelength when ordering. The fiber type is 400Ám-diameter core, plastic clad silica. Standard length is 2.5 meters. Other fiber lengths are available upon request.

3. MRI-compatible individual emitter fiber with SMA connector on one end and a bare cleaved fiber on the other end. The fiber type is 400Ám-diameter core, plastic clad silica with a fiber length of 10 meters.

The standard fiber bundle for the collection of light and delivery to the PMT detector is a 3 mm bundle with a standard length of 2.5 m. Other fiber lengths are available upon request.